close roop Variable Pump Injection Mould Machine Model K2-130
Detailed Product Description
INJECTION PART
The injection cylinder is parallel or balance to both sides of the barrel ,so as to ensure the non de-viation of the nozzle ,good sealing and nonleak-age of rubber ,it is equipped with double guide pillar supporting system ,which can inject under multi-pressure and at various speeds .it also uses one -stop hydraulic motor pre -injection device
HYDRAULIC PART
It adopts the imported top quality hydraulic components and the cart ridge valve.
MOLD PART
Oil motor drives the adjustment of gear mold ,with good synchr-ocyclotron . The die can be adjusted automatically in accordance with the set pressure ,which is both convenient and reliable .
MOLD PART
Five- support crankshaft stucture .The mold and the supports all use the portal structure ,with good rigidity and high fitting precision,Adopting the computer optimized design ,the mold employs definite analysis less system ,With doublecore pulling device ,it boasts super sensitive low pressure protection functions. The mechanical ,hydraulic and electrical protections have ensured the human safety ,The dismountable fill-out hopper can be installed conveniently and automatically ,The moveabel platen is running in roll,with little friction and balanced and dependable moving
SPECIFICATIONS
| SPECIFICATIONS | | | | |
| DESCRIPTION | UNIT | K2-130 |
| INJECTION | | A | B | C |
| SHOT VOLUME | CM3 | 215 | 263 | 302 |
| SHOT WEIGHT | G | 196 | 239 | 274 |
| (PS) | OZ | 6.9 | 8.4 | 9.6 |
| SCREW DIAMETER | MM | 38 | 42 | 45 |
| INJECTION PRESSURE | MPA | 193 | 158 | 138 |
| SCREW L:D RATIO | | 22:1 | 20:1 | 18.5:1 |
| SCREW STROKE | MM | 190 |
| SCREW SPEED (STEPLESS) | R/MIN | 0~180 |
| CLAMPING UNIT | | | | |
| CLAMPING FORCE | KN | 1300 |
| OPENING STROKE | MM | 380 |
| PLATEN SIZE | MM*MM | 610*610 |
| SPACE BETWEEN TIE BARS | MM*MM | 410*410 |
| MOLD THICKNESS (MIN-MAX) | MM | 160~450 |
| MAX.DAYLIGHT | MM | 830 |
| HYDRAULIC EJECTION STROKE | MM | 120 |
| HYDRAULIC EJECTION FORCE | KN | 42 |
| POWER UNIT | | | | |
| HYDRAULIC SYSTEM PRESSURE | MPA | 17.5 |
| PUMP MOTOR(V/S) | KW | 11/18.5 |
| HEATING CAPACITY | KW | 7.7 |
| NUMBER OF TEMP CONTROL ZONES | | 4+(NOZZLE ) |
| GENERAL | | | | |
| DRY-CYCLE TIME | SEC | 1.3 |
| OIL TANK CAPACITY | L | 200 |
| MACHINE DIMENSIONS | MXMXM | 4.6*1.2*1.8 |
| MACHINE WEIGHT | KG | 4600 |
Product Tags:
|
|
Close roop Variable Pump Injection Mould Machine 42kn 120 mm Images
|
